KwikWeld MicroWelder
Microwelding Powder
- The KwikWeld Microwelder Model KWX2 is set in the C.D. mode.
- Powdered metal is positioned over the damaged area using the magnetic probe.
- The tip of the silver tungsten electrode is pressed down on the powdered metal, trapping a small amount of repair material between itself and the damaged area.
- Repeat this process until sufficient material has been welded in the damaged area.
- Remove the excess powdered welding material from the work area using the magnetic probe.
- Go back over the repaired area with the electrode using the roll weld process to complete the microweld and smooth the area.
- Lap and polish the repair area to complete the job.
Go here if there is not a menu on the left!
Home / Movie / Roll Welding / Wire Welding / Powder Welding / Repair Material / Electrodes / Specifications / FAQ / Price Sheet / Deutsch / Español / Contact Us
 |
Phone: Toll free: (866) 791-2384
|
|